表面喷砂对有机玻璃沿面闪络性能影响

绝缘子表面粗糙处理是提升其沿面闪络性能的重要途径,表面粗糙化处理方式不当,极易带来表面结构不均匀,难以获得稳定耐压性能的绝缘材料。为提升绝缘子表面粗糙处理的均匀性,本文利用表面喷砂技术对圆柱形有机玻璃(PMMA)绝缘子进行了粗糙化处理研究,以球形二氧化硅(SiO2)颗粒为工作介质,研究了不同喷砂粒径、氢氟酸后处理等因素对绝缘材料表面形貌和组分的影响,并利用短脉冲高压测试平台对喷砂处理前后有机玻璃绝缘子样品进行了真空沿面闪络性能测试。研究结果表明,喷砂处理在有机玻璃表面形成了较为均匀的凹坑,HF酸能够有效去除表面残留的SiO2颗粒,具有表面喷砂粗糙结构的绝缘子沿面闪络电压得到了稳定提升,相较于未处理的绝缘子闪络电压提升了约80%。     

聚乙烯吡咯烷酮对油中酚类物质的吸附性能

煤焦油中酚类物质的有效分离,可实现其高附加值利用。针对酚类物质的分离,本研究采用聚乙烯吡咯烷酮(PVP)为吸附剂,研究了其对模型油中邻甲酚、间甲酚、对甲酚、1-萘酚和2-萘酚等的吸附性能。研究发现,PVP对酚类物质具有较大的吸附容量,其中对间甲酚、对甲酚、1-萘酚和2-萘酚的最大吸附量均可达1000 mg/g以上。同时发现,PVP上的Lewis碱性位点(C=O和C-N)可与酚羟基之间形成氢键作用,该作用的强度受酚类物质空间位阻影响。PVP具有一定的吸附选择性,在苯并呋喃或喹啉存在下,依然能够有效吸附2-萘酚。此外,使用过的PVP可再生并重复利用,同时实现酚的回收。可见,PVP是一种可用于分离煤焦油中酚类物质的优良吸附剂。     

平面硅异质结太阳电池的光吸收增强的研究

钙钛矿/硅叠层太阳电池可以充分利用太阳光谱,提高光电转换效率.平面硅异质结太阳电池可以作为叠层电池的底电池,其性能直接影响叠层电池的性能表现.采用传统反应热蒸发技术,在低温(170 ℃)条件下制备了掺锡氧化铟薄膜,并在170 ℃的氧气氛围下后退火处理,对ITO薄膜的特性进行了详细的表征和分析.结果表明:后退火工艺改善了ITO的结晶特性,使得材料的光学特性和电学特性得到明显提高,将其应用于平面硅异质结太阳电池,短路电流密度得到极大提高,尤其红外光响应改善明显.引入MgF2薄膜作为减反射层,进一步增强了电池的光响应,转换效率达到19.04;.     

Recent Advances of Freestanding Cathodes for Li-S Batteries

Lithium-sulfur batteries (LSBs) with high energy density and low cost have been recognized as one of the most promising next-generation energy storage systems. Although it has taken decades of development, the practical application of LSBs has been hindered by several inherent obstacles, particularly the severe shuttle effect and sluggish reaction kinetics in the sulfur cathode. Various strategies have been proposed to address these problems via rational design of electrode materials and configurations. Freestanding sulfur cathode could be a promising strategy to improve the sulfur mass loading at the cathode level and energy density of LSBs. This minireview will briefly summary the recent advances in freestanding cathodes for LSBs. The advantages and disadvantages of various freestanding cathodes are discussed and the prospects for the development of flexible cathodes are envisioned.     

多片导模法蓝宝石晶体的缺陷研究

使用导模法(EFG)生长了多片a面蓝宝石晶体。显微拉曼光谱结合电感耦合等离子体发射光谱(ICP-AES)测试得出晶体的气泡中可能存在含S化合物。晶体表面明显的生长条纹主要与温度、生长速度的波动以及模具的加工精度有关。化学腐蚀分析表明晶体位错密度在4.2×10⁴ cm^-2,未存在小角度晶界缺陷,双晶摇摆曲线半峰宽(FWHM)为70.63″。由于采用石墨保温材料,晶体中存在F心与F⁺色心。晶体在400~3 000 nm波段透过率高于80%,空气中退火后可减弱色心吸收。本文研究结果可为蓝宝石晶体缺陷形成理论研究提供参考,也可为导模法蓝宝石工业生产技术改进提供借鉴。     

钛合金微弧氧化陶瓷层及其复合膜层研究进展

本文介绍了近年电解液及添加剂在制备钛合金微弧氧化陶瓷层、将微弧氧化与其他表面处理技术相结合制备复合膜层方面的研究进展.对电解液在微弧氧化过程中的作用、对陶瓷层形貌、结构及性能的影响等方面进行了总结.根据电解液添加剂的组成和状态,将其分为有机物、可溶性盐、固体颗粒三类,阐述了各种添加剂在陶瓷层形成中作用机制.对基于微弧氧化技术的复合膜层研究情况进行了分析总结.展望了钛合金微弧氧化陶瓷层制备技术未来的研究趋势.     

Polyhydrido Copper Nanoclusters with a Hollow Icosahedral Core: [Cu30H18{E2P(OR)2}12] (E=S or Se; R=nPr,iPr or iBu)

Although atomically precise polyhydrido copper nanoclusters are of prime interest for a variety of applications, they have so far remained scarce. Herein, this work describes the synthesis of a dithiophosphate-protected copper(I) hydride-rich nanocluster (NC), [Cu₃₀H₁₈{S₂P(OnPr)₂}₁₂] ( 1_H ), fully characterized by various spectroscopic methods and single-crystal X-ray diffraction. The X-ray structure of 1_H reveals an unprecedented central Cu₁₂ hollow icosahedron. Six faces of this icosahedron are capped by Cu₃ triangles, the whole Cu₃₀ core being wrapped by twelve dithiophosphate ligands and the whole cluster has ideal S₆ symmetry. The locations of the 18 hydrides in 1_H were ascertained by a single-crystal neutron diffraction study. They are composed of three types: capping μ₃-H, interstitial μ₄-H (seesaw) and μ₅-H ligands (square pyramidal), in good agreement with the DFT simulations. The numbers of hydrides and ligand resonances in the ¹H NMR spectrum of 1_H are in line with their coordination environment in the solid state, retaining the S₆ symmetry in solution. Furthermore, two new Se-protected polyhydrido copper nanoclusters, [Cu₃₀H₁₈{Se₂P(OR)₂}₁₂] ( 2_H : R=iPr 3_H : R=iBu) were synthesized from their sulfur relative 1_H via ligand displacement reaction and their X-ray structures feature the exceptional case where both the NC shape and size are fully conserved during the course of ligand exchange. DFT and TD-DFT calculations allow understanding the bonding and optical properties of clusters 1_H – 3_H . In addition, the reaction of 1_H with [Pd(PPh₃)₂Cl₂] in the presence of terminal alkynes led to the formation of new bimetallic Cu−Pd alloy clusters [PdCu₁₄H₂{S₂P(OnPr)₂}₆(C≡CR)₆] ( 4 : R=Ph; 5 : R = C₆H₄F).     

Tuning the Triplet Excited State of Bis(dipyrrin) Zinc(II) Complexes: Symmetry Breaking Charge Transfer Architecture with Exceptionally Long Lived Triplet State for Upconversion

Zinc(II) bis(dipyrrin) complexes, which feature intense visible absorption and efficient symmetry breaking charge transfer (SBCT) are outstanding candidates for photovoltaics but their short lived triplet states limit applications in several areas. Herein we demonstrate that triplet excited state dynamics of bis(dipyrrin) complexes can be efficiently tuned by attaching electron donating aryl moieties at the 5,5′-position of the complexes. For the first time, a long lived triplet excited state (τ_T=296 μs) along with efficient ISC ability (Φ_Δ=71 %) was observed for zinc(II) bis(dipyrrin) complexes, formed via SBCT. The results revealed that molecular geometry and energy gap between the charge transfer (CT) state and triplet energy levels strongly control the triplet excited state properties of the complexes. An efficient triplet–triplet annihilation upconversion system was devised for the first time using a SBCT architecture as triplet photosensitizer, reaching a high upconversion quantum yield of 6.2 %. Our findings provide a blueprint for the development of triplet photosensitizers based on earth abundant metal complexes with long lived triplet state for revolutionary photochemical applications.     

Stereoselectivity and nonmigratory insertion mechanism of dimethylacetylene dicarboxylate into metallocene-hydride of Cp2M(L)H [Cp = η5-C5H5; M = Nb,V; L = CO,P (OMe)3]: A DFT study

The insertion of an alkyne into transition metal–hydrogen bonds is a key elementary step in catalytic polymerization and hydrogenation processes. It was found that a (Z)- or (E)-type alkyenyl complex can be formed through trans/cis stereospecific processes. In this work, the reaction mechanism of Cp₂M(L)H [Cp = η⁵-C₅H₅; M = Nb, V; L = CO, P (OMe)₃] with dimethylacetylene dicarboxylate (DMAD), and the factors influencing the stereoselectivity have been investigated based on density functional theory calculations. The calculated results show that all of the reactions are exothermic. For L = CO, the Z-isomer product forms first even at low temperatures because of the low Gibbs free energy barrier (ΔG^#). Then the Z-pro converts to E-pro , while for L = P (OMe)₃, the exclusive product is the E-isomer. For different metal centers, the reaction mechanisms of the Cp₂M(CO)H + DMAD (M = Nb and V) reaction are similar, while their products are different at room temperature. For M = Nb, because the energy barrier of the isomerization from Z-pro to E-pro is low and the relative free energies of Z-pro and E-pro are almost equal, both Z-pro and E-pro can be obtained. While for the Cp₂V(CO)H + DMAD reaction, only the Z-pro can be obtained under mild conditions, E-pro can be obtained only at high temperatures. For the Cp₂M(CO)H+DMAD(M=V and Nb) reactions, the formation of E-isomer products proceeds via two five-membered ring transition states. The calculated results provide an reasonable explanation for the experimental results and predict a new insertion reaction.